Tripp Lite In-Line HDMI Surge Protector for Digital Signage - 4K @ 30 Hz, HDMI 1.4, HDCP, IEC Compliant - surge
Mfg # B110-SP-HDMI
CDW # 5719517
Quick tech specs
- Protects HDMI equipment from damage caused by power surges/ ESD and lightning
- Rapid reaction time under 1ns helps prevent damage from lightning/power surges
- Compliant w/ Federal Trade Agreements Act (TAA compliant) for GSA Schedule purchases
- Tripp Lite is now part of Eaton
- Easy to connect between HDMI source and display using standard HDMI cabling
- Supports Ultra HD picture quality at resolutions up to 3840 x 2160 (4Kx2K)@ 30Hz
- In-Line HDMI Surge Protector/ HDMI Surge Suppressor
Know your gear
Ideal for trade shows, convention halls, home theaters and other digital signage applications, the B110-SP-HDMI protects connected equipment from damage caused by lightning, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and display using HDMI cables, such as Tripp Lite's P568-003-Series high-speed cables (sold separately). Note: two B110-SP-HDMI surge protectors are required to protect both source and display.
Solid-state silicon-avalanche diode technology features low clamping voltage, providing superior protection against ESD and super-fast response time under one nanosecond. Low TDMS (Transition Minimized Differential Signaling) loss ensures you get the crispest and cleanest image on your display without any interference, including static lines. The B110-SP-HDMI meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (air), +/- 8kV (contact); IEC 61000-4-4 (EFT) 40A (5/50ns); and IEC 61000-4-5 (Lightning) 5A (8/20µs).
This HDMI in-line surge protector supports 4K x 2K resolutions up to 3840 x 2160 at 30 Hz, as well as HDMI 1.4 and HDCP 2.2 specifications. It is a passive design and requires no external power supply. The compact metal housing is designed to endure in applications where static discharge is likely to occur. Mounting hardware is included for convenient installation where needed. Be sure the distance between the B110-SP-HDMI and the equipment it is protecting is no more than 3 feet.
The B110-SP-HDMI is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Solid-state silicon-avalanche diode technology features low clamping voltage, providing superior protection against ESD and super-fast response time under one nanosecond. Low TDMS (Transition Minimized Differential Signaling) loss ensures you get the crispest and cleanest image on your display without any interference, including static lines. The B110-SP-HDMI meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (air), +/- 8kV (contact); IEC 61000-4-4 (EFT) 40A (5/50ns); and IEC 61000-4-5 (Lightning) 5A (8/20µs).
This HDMI in-line surge protector supports 4K x 2K resolutions up to 3840 x 2160 at 30 Hz, as well as HDMI 1.4 and HDCP 2.2 specifications. It is a passive design and requires no external power supply. The compact metal housing is designed to endure in applications where static discharge is likely to occur. Mounting hardware is included for convenient installation where needed. Be sure the distance between the B110-SP-HDMI and the equipment it is protecting is no more than 3 feet.
The B110-SP-HDMI is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Enhance your purchase
Tripp Lite Surge Protector In-Line for Digital Signage 4K @ 30Hz HDMI 1.4 is rated
4.70 out of
5 by
6.
Rated 5 out of
5 by
null from
In-Line for Digital Signage 4K works well
product meets the needs while protecting our equipment
Date published: 2022-12-04T17:55:15-05:00
Rated 5 out of
5 by
Terry from
Easy Install, Hope to protect AV receiver
HDMI ports dying on Marantz AV receiver where Tivo plugged in. Hope to protect the receiver.
Date published: 2022-08-29T00:00:00-04:00
Rated 5 out of
5 by
joseph from
is ok but degrades signal
it interferes with the signal going to the port-i always have to disconnect and reconnect to get a picture.
Date published: 2021-08-11T00:00:00-04:00
Rated 5 out of
5 by
Mark from
Hoping thes will help isolate tv and receiver
Easy to install with labeling for input output. I hop these work as my tv and receiver were both damaged from a lightning strike near my home. I am hoping this will isolate each one from the other. My devices don't have convenient grounding lugs available.
Date published: 2022-10-05T00:00:00-04:00
Rated 5 out of
5 by
Mark from
The weak link: HDMI
We experienced a direct lightning strike to the roof last summer (bypassing the whole house surge protection). A fair number of devices got nailed, but guess what, by far, was the weakest link? Without exception: HDMI ports. And I bet the long cable run from the AV receiver to the projector was a prime candidate for getting damaged since the HDMI likely acted as an antenna (I'm a RF engineer).
A search led me to the Tripp Lite HDMI protector. I bought two (one placed at the receiver, one at the projector) to help prevent damage to the new units. In order to easily ground the surge protector, I just bought a 3 prong plug, and connected the ground wire to the ground pin of the plug, then plugged into a grounded outlet.
Date published: 2023-04-22T00:00:00-04:00
Rated 5 out of
5 by
Fred from
Noise Free! Clean Signal! No artifacts!
I use this to protect processing equipment from line surges from ungrounded/ poorly grounded sources
Date published: 2020-02-04T00:00:00-05:00