Tripp Lite series 100GBase-SR4 QSFP28 Transceiver Cisco QSFP-100G-SR4-S 100G MPO MMF
$532.99
Mfg # N286-100G-SR4SC
CDW # 7607308
Quick tech specs
- Connects a multimode Gigabit Ethernet fiber optic network cable to a Cisco switch/server’s QSFP28 port
- Provides 100Gbps throughput up to 100m via multimode fiber cabling
- Hot-swappable interface lets you install/uninstall without shutting down
- 3 Year Eaton Warranty
- QSFP28 transceiver module 100% compatible with Cisco's QSFP-100G-SR4-S module
- 12-strand MTP/MPO connector supports 100GBase-SR4 signal at 850nm
- Supports DDM for monitoring temperature/ real-time operating parameters
Know your gear
QSFP28 Transceiver Designed for Connection to Your Cisco Network Switch or Server
This QSFP28 transceiver allows you to connect a multimode fiber optic cable to a 100 Gbps network router, server or switch. It transmits data up to 100 meters (328.08-ft.) using an 850 nm wavelength. The zinc housing protects against electromagnetic interference (EMI) and excessive power dissipation.
Functionally Equivalent to Cisco QSFP-100G-SR4-S Transceiver Module
The MSA-compliant N286-100G-SR4SC functions just like the equivalent Cisco QSFP-100G-SR4-S transceiver module and is manufactured to meet or exceed Cisco specifications. You can use this transceiver with any compatible Cisco router, server or switch and receive the same performance as the QSFP-100G-SR4-S.
Hot-Swappable for Installation Without Network Interruption
This input/output device is fully hot-swappable, so you can install it without a potentially costly 100 Gbps network shutdown or device reboot. Just plug the QSFP28 end of the transceiver into your Cisco network device. The other end has an MTP/MPO connector to link with multimode fiber cable (sold separately). A push/pull tab connector is easily accessible in high-density data center applications and makes the plug-and-play transceiver easy to install and remove with one hand.
Supports Digital Diagnostic Monitoring (DDM) for Real-Time Status Monitoring
DDM support lets you keep track of various operating status in real time including transceiver temperature, input and output power, and supply voltage.
This QSFP28 transceiver allows you to connect a multimode fiber optic cable to a 100 Gbps network router, server or switch. It transmits data up to 100 meters (328.08-ft.) using an 850 nm wavelength. The zinc housing protects against electromagnetic interference (EMI) and excessive power dissipation.
Functionally Equivalent to Cisco QSFP-100G-SR4-S Transceiver Module
The MSA-compliant N286-100G-SR4SC functions just like the equivalent Cisco QSFP-100G-SR4-S transceiver module and is manufactured to meet or exceed Cisco specifications. You can use this transceiver with any compatible Cisco router, server or switch and receive the same performance as the QSFP-100G-SR4-S.
Hot-Swappable for Installation Without Network Interruption
This input/output device is fully hot-swappable, so you can install it without a potentially costly 100 Gbps network shutdown or device reboot. Just plug the QSFP28 end of the transceiver into your Cisco network device. The other end has an MTP/MPO connector to link with multimode fiber cable (sold separately). A push/pull tab connector is easily accessible in high-density data center applications and makes the plug-and-play transceiver easy to install and remove with one hand.
Supports Digital Diagnostic Monitoring (DDM) for Real-Time Status Monitoring
DDM support lets you keep track of various operating status in real time including transceiver temperature, input and output power, and supply voltage.
Add to Compare