Quick tech specs
  • 1.4kW single-phase ATS/Switched PDU 120V w/ 8 Outlets and 2 12ft cords
  • 8 Outlets (NEMA 5-15R); 2 NEMA 5-15P inputs 12ft cords
  • Enables redundant A/B power option for single-corded network devices
  • PDU/ Power Distribution Unit/ PDU Strip/ Switched PDU/ rack pdu/ pdus/ datacenter pdu/ network pdu/ Vertical PDU/ ATS PDU
  • Separate primary/secondary inputs connect to any two compatible power source
  • Built-in network interface and two digital visual current meters
View All

Know your gear

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. The built-in Java-free HTML5-based LX Platform interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP, BOOTP and NTP. Switched PDU features include individually controllable output receptacles. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

Availability: 19 units In Stock

Enhance your hardware

Add Warranty

Better Together

Current Item
Tripp Lite PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM

This Item: Tripp Lite PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM


Total Price:
Tripp Lite PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM is rated 4.67 out of 5 by 3.
Rated 5 out of 5 by from I would definitely get this Very simple to use, and an amazing product.
Date published: 2021-10-19T00:00:00-04:00
Rated 5 out of 5 by from null The reality is, that you can get PDU's for cheaper, and some of the features like the display of power consumption, and the network interface are cool, but not totally necessary. Also in our environment, the incoming power, and the devices that needed power came from the same side, so I have a power cord going over my device, which doesn't look the best but it works.
Date published: 2013-04-25T00:00:00-04:00
Rated 5 out of 5 by from Full featured PDU, great quality Great PDU, great brand, happy with device I just wonder why it doesn't have all it's ports on the back of the device. Also the ampmeter is less acurate than I'd like. The features met my exact needs except for these design choices.
Date published: 2022-05-30T00:00:00-04:00