Tripp Lite HDMI/DVI Over IP Transmitter & Receiver Extender Kit Audio/Video with RS-232 Serial and IR Control 1920 x
$459.00
$299.99
Mfg # B160-101-HDSI
CDW # 4389580
Quick tech specs
- Transmitter and receiver convert HDMI audio/video to an IP-based signal
- HDMI-DVI Audio-Video w/RS-232 Serial
- Units connect point-to-point without a switch up to 328 ft. apart
- Plug/play-no software or drivers required
- IR Control over IP extender kit/HDMI KVM over IP/HDMI KVM over ethernet/HDMI and IR over IP/HDMI over IP extender with IR
- Supports video resolutions up to 1920x1080 (1080p) @ 60 Hz,656 ft 200 m
- Designed for managed network switches with IGMP
Know your gear
The B160-101-HDSI HDMI/DVI Audio/Video with RS-232 Serial and IR Control over IP Extender Kit extends and distributes HDMI or DVI audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch located up to 328 feet (100 m) from the transmitter. With an additional 328 feet between the switch and the receiver, the maximum distance from source to display is 656 feet (200 m). You can also directly connect the transmitter and receiver up to 328 feet apart with Cat5/Cat6 cabling.
The B160-101-HDSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.
The B160-101-HDSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. In a point-to-multipoint switch installation, you can send the HDMI or DVI video source (a DVI adapter cable is included) to any analog or digital display, including VGA and DisplayPort. It extends IR control signals that control a source, such as a Blu-ray player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.
The B160-101-HDSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.
The B160-101-HDSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. In a point-to-multipoint switch installation, you can send the HDMI or DVI video source (a DVI adapter cable is included) to any analog or digital display, including VGA and DisplayPort. It extends IR control signals that control a source, such as a Blu-ray player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.
Add to Compare