Tripp Lite Unmanaged Industrial Gigabit Ethernet Switch 8-Port 10/100/1000 Mbps PoE+ 30W 2 GbE SFP Slots TAA Compliant
$728.00
$494.99
Mfg # NGI-U08C2POE8
CDW # 6652303
Quick tech specs
- Industrial-grade switch expands Ethernet connectivity to factory floors and other environments w/ space constraints and wide temperature ranges
- PoE+ ports deliver up to 30W each w/ a 240W total PoE budget @ 48VDC
- Plug-and-play operation w/ no software or configuration required before use
- Tripp Lite is now part of Eaton
- 8 auto-negotiable RJ45 and 2 GbE SFP ports connect devices over a LAN
- Industrial-grade switch supports operating temperature range of -40 to 167 F
- TAA Compliant
Know your gear
This Tripp Lite network switch connects devices, such as computers, printers and servers, to a local area network (LAN) and allows them to communicate over the network. Eight auto-negotiating 10/100/1000 Mbps PoE (Power over Ethernet) ports send data only to the devices designated to receive it, which improves the efficiency and potential throughput of the network. The NGI-U08C2POE8 also features two GbE SFP slots for uplinking data to other switches via optical fiber or copper.
Especially recommended for security applications to power IP cameras, VoIP phones and other PoE-compatible devices, this unmanaged switch provides PoE+ compatibility with wireless access points and other devices with up to 30W per port and a PoE budget of 120W at 24VDC or 240W at 48VDC.
The NGI-U08C2POE8 adds Gigabit Ethernet capacity to your industrial and commercial applications, such as factories, construction sites, supply rooms and warehouses. You can share large bandwidth-intensive files, such as CAD drawings and videos, improving efficiency and cutting costly downtime. The industrial-grade switch with its rugged high-strength case withstands vibration, shock and free fall. It can also operate in extreme temperatures ranging from -40 degrees to 167 degrees Fahrenheit.
Because it is an unmanaged switch, the NGI-U08C2POE8 does not require configuration before use. LEDs indicate when the switch is powered on and which Ethernet ports are showing activity. The NGI-U08C2POE8 supports MAC address auto-learning and auto-aging for efficient routing, as well as automatic MDI/MDI-X crossover detection for plug-and-play functionality. IEEE 802.3x flow control allows smooth transmission of large files. A DIP switch supports an alarm relay output in which you can connect an alarm light or buzzer.
The device may be DIN mounted using the pre-installed rail clip, which mounts firmly to any standard 35 mm DIN rail. A 6-pin 24 - 57VDC terminal block supplies power input.
The NGI-U08C2POE8 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Especially recommended for security applications to power IP cameras, VoIP phones and other PoE-compatible devices, this unmanaged switch provides PoE+ compatibility with wireless access points and other devices with up to 30W per port and a PoE budget of 120W at 24VDC or 240W at 48VDC.
The NGI-U08C2POE8 adds Gigabit Ethernet capacity to your industrial and commercial applications, such as factories, construction sites, supply rooms and warehouses. You can share large bandwidth-intensive files, such as CAD drawings and videos, improving efficiency and cutting costly downtime. The industrial-grade switch with its rugged high-strength case withstands vibration, shock and free fall. It can also operate in extreme temperatures ranging from -40 degrees to 167 degrees Fahrenheit.
Because it is an unmanaged switch, the NGI-U08C2POE8 does not require configuration before use. LEDs indicate when the switch is powered on and which Ethernet ports are showing activity. The NGI-U08C2POE8 supports MAC address auto-learning and auto-aging for efficient routing, as well as automatic MDI/MDI-X crossover detection for plug-and-play functionality. IEEE 802.3x flow control allows smooth transmission of large files. A DIP switch supports an alarm relay output in which you can connect an alarm light or buzzer.
The device may be DIN mounted using the pre-installed rail clip, which mounts firmly to any standard 35 mm DIN rail. A 6-pin 24 - 57VDC terminal block supplies power input.
The NGI-U08C2POE8 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Add to Compare