StarTech Dual-Slot M.2 to SATA Adapter, M.2 SATA Adapter for 2.5" Drive Bay, M.2 SSD Adapter, M.2 NGFF SSD TAA
$61.49
$48.99
Mfg # S322M225R
CDW # 4872155
| UNSPSC 43211600
Quick tech specs
- Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5" SATA interface
- Supports B key M.2 SATA SSDs incl full-length M.2 SSD drives (2230/2242/2260/2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs)
- SMART support
- Dual-Slot M.2 to SATA Adapter supports multiple RAID modes: RAID 0/RAID 1 or spanning or JBOD
- TRIM support
- M.2 Adapter/M.2 SSD Adapter/M.2 SATA Adapter/Dual M.2 to SATA Adapter/Dual M.2 SATA SSD Adapter
Know your gear
Boost your system performance by enhancing the capacity, speed and security of your data storage. This two-drive M.2 to SATA adapter lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5" drive bay, and increase your storage options by configuring a powerful RAID array. Build a RAID array to enhance system performance The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independently of one another. Maximize file transfer speeds The M.2 SATA SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SATA SSDs in place of a platter drive reduces your data transfer bottlenecks, giving you file transfer speeds of up to 6Gbps. The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs. Easy installation This open-frame adapter is easy to install as it comes with all the necessary installation hardware and doesn't require any extra software or drivers, to get you up and running quickly. The S322M225R is backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer
Add to Compare
Enhance your purchase
StarTech Dual-Slot M.2 to SATA Adapter, M.2 SATA Adapter for 2.5" Drive Bay is rated
2.00 out of
5 by
3.
Rated 5 out of
5 by
Matt1 from
Unknown
Does not seem to work with terramaster F2-423 in ANY of the drive configurations set by jumpers.
Date published: 2022-12-14T00:00:00-05:00
Rated 5 out of
5 by
LeoKnightas from
No TRIM suport as stated
I am using this with two Orico 4 TB SSD's in Mac OS Sequoia Via a Sonnet Thunderbolt to SATA adapter. The adapter and OS support Port Multiplication so the mode is JBOD. Both drive are formatted APFS. Mac OS says TRIM is NOT supported, and the drives intermittently crash while playing movies stored on them.
Date published: 2025-06-28T00:00:00-04:00
Rated 5 out of
5 by
michaelmab88 from
It does the job, but terrible experience
Using the RAID 1 configuration, I had a drive fail and the Adapter did not illuminate the LEDs as they should have been to indicate a drive failure. I had to remove the bad drive before the device could be recognized by any computer. I expected the adapter to continue to work after a single drive failure in the RAID 1 configuration. It defeats the purpose of having a RAID 1 array if the still working redundant disk cannot be accessed while the other disk has failed.
I don't recommend using it in a place (i.e. a laptop) where you can't see the LEDs and know whether your drives are both working. There's no SMART functionality in RAID 1 mode, so it's not ideal.
The support technician was very helpful, it was just the adapter that did not meet my expectations.
Date published: 2024-01-08T00:00:00-05:00