Network Instruments Optical nTAP Three-Channel - tap splitter - 1 Gbps
Mfg # TO3-M5-LC-55-K
CDW # 1524399
| UNSPSC 43201553
Know your gear
The Three-Channel Optical nTAP includes a connection to either side of three full-duplex links under test, and three standard full-duplex analyzer connections. Optical nTAPs support gigabit single-mode, gigabit multimode, and 10 Gb single-mode and multimode traffic. LC connections are standard.
Optical nTAPs split the full-duplex signal from the network into two signals, sending one signal back to the network and the other signal to the monitoring device, which is required to be equipped with a dual-receive capture card. Signal split ratios of 50/50, 60/40, 70/30, 80/20, and 90/10 are available to support your network requirement.
Every nTAP works with the leading security and network management tools, so you can easily deploy them throughout the network. As with all nTAPs, optical nTAPs are transparent, allowing you to monitor critical links without data stream interference. And by installing nTAPs, you never need to bring the link down to connect a monitoring device.
Optical nTAPs split the full-duplex signal from the network into two signals, sending one signal back to the network and the other signal to the monitoring device, which is required to be equipped with a dual-receive capture card. Signal split ratios of 50/50, 60/40, 70/30, 80/20, and 90/10 are available to support your network requirement.
Every nTAP works with the leading security and network management tools, so you can easily deploy them throughout the network. As with all nTAPs, optical nTAPs are transparent, allowing you to monitor critical links without data stream interference. And by installing nTAPs, you never need to bring the link down to connect a monitoring device.