Viking 3 Relay Remote Controller
Mfg # RC-3
CDW # 1257993
| UNSPSC 39121552
Know your gear
The RC-3 enables a standard Touch Tone phone to control up to 3 maintained ON, maintained OFF, or momentary relay contacts from a remote location. The RC-3 is fully user programmable and uses non-volatile E2 memory.
Up to three RC-3’s can be daisy chained on the same line to control up to nine relays.
The RC-3 features switchable 12V talk battery allowing easy installation on the trunk port. In addition, the unit can be connected directly to a C.O. line or analog PABX/KSU station.
The RC-3 also features a built in pulse dialer activated by a contact closure from an alarm system, temperature sensor, etc. The RC-3 will dial the number up to three times sending alert tones indicating an emergency.
Applications:
Remote Control of:
High security building entry systems
Door strikes and gates in conjunction with doorboxes (W-1000, etc.)
Signs, lights, cameras, sprinklers, motors
Other contact controlled equipment
Can also be used as an emergency dialer for alarm systems, etc.
Features:
User Touch Tone programmable
Non-volatile E2 memory
12 digit alarm activated pulse dialer
6 digit security code (to access programming)
6 digit access code (disable or enable for additional control security)
Switchable 12V talk battery
Relay interrogation tones
Programmable relay time delays
Cascade up to three RC-3’s to control up to nine relays
Programmable ring delay before answering
Status LED’s for relays 1, 2, 3 and the answer relay
One power adaptor can power up to three units
1 Year Warranty
Made in USA
Specifications:
Power: 120V AC/12V DC 500mA UL listed adapter provided
Shipping Weight: 3.6 kg (8 lbs)
Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
Pulse Dialing Speed: 10 pps
Talk Battery Output: 12V DC minimum (15V nominal)
Relay contact ratings: .5A @ 125V AC/1A @ 30V DC
On hook time between alarm dialing: 2.5 seconds
Connections: (2) RJ11 jacks, 10 position screw terminal strip
Up to three RC-3’s can be daisy chained on the same line to control up to nine relays.
The RC-3 features switchable 12V talk battery allowing easy installation on the trunk port. In addition, the unit can be connected directly to a C.O. line or analog PABX/KSU station.
The RC-3 also features a built in pulse dialer activated by a contact closure from an alarm system, temperature sensor, etc. The RC-3 will dial the number up to three times sending alert tones indicating an emergency.
Applications:
Remote Control of:
High security building entry systems
Door strikes and gates in conjunction with doorboxes (W-1000, etc.)
Signs, lights, cameras, sprinklers, motors
Other contact controlled equipment
Can also be used as an emergency dialer for alarm systems, etc.
Features:
User Touch Tone programmable
Non-volatile E2 memory
12 digit alarm activated pulse dialer
6 digit security code (to access programming)
6 digit access code (disable or enable for additional control security)
Switchable 12V talk battery
Relay interrogation tones
Programmable relay time delays
Cascade up to three RC-3’s to control up to nine relays
Programmable ring delay before answering
Status LED’s for relays 1, 2, 3 and the answer relay
One power adaptor can power up to three units
1 Year Warranty
Made in USA
Specifications:
Power: 120V AC/12V DC 500mA UL listed adapter provided
Shipping Weight: 3.6 kg (8 lbs)
Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
Pulse Dialing Speed: 10 pps
Talk Battery Output: 12V DC minimum (15V nominal)
Relay contact ratings: .5A @ 125V AC/1A @ 30V DC
On hook time between alarm dialing: 2.5 seconds
Connections: (2) RJ11 jacks, 10 position screw terminal strip