Tripp Lite PDU Dual Source Hot Swap 100-127V 16A 8 5-15/20R Horizontal 2URM
Mfg # PDUB20
CDW # 2056274
Quick tech specs
- Single-phase horizontal rackmount PDU w/ Hot-Swap capability
- 8 Outlets (4 5-15R 4 5-15/20R) 120V 20A 1.9kW
- 2U rackmount installation
- Manual transfer switch controls PDU input power source
- PDU/ Power Distribution Unit/ PDU Strip/ Horizontal PDU/ Basic PDU/ rack pdu/ pdus/ data center pdu/ network pdu
- Enables live replacement of a standard UPS
- Compatible w/ any UPS with a 5-15P or 5-20P plug
- Pair of 5-20P input cables connect to separate Utility and UPS inputs
Know your gear
Tripp Lite’s Hot-swap PDU systems enable live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads. Dual input power cables support PDU connection to separate Utility and UPS power sources. Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS. Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS. Set the switch to Utility to momentarily power connected equipment from the Utility line cord and bypass the UPS while the UPS system is removed and replaced with a fresh one. Once the new UPS is up and running with all data and electrical connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment.
PDUB20 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated 2200 to 2600VA with a 5-20P input plug. Pair of attached 5-20P PDU input cables connect to separate Utility and UPS power sources. 4 5-15R and 4 5-15/20R outlets support critical networking loads in both Utilty and UPS operating modes. 2U rackmount installation in 2 or 4 post racks with support for space saving rear-post mounting in the same rack space as your Tripp Lite Rackmount UPS (select installations, see manual)
Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads
PDUB20 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated up to 2600VA or 1920 watts with a NEMA 5-15P or 5-20P input cable
2U horizontal rackmount form factor compatible with 2 or 4 post racks
Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS systems (select installations, see manual)
Pair of attached 5-20P PDU input cables connect to separate Utility and UPS power sources
4 5-15R and 4 5-15/20R outlets support critical networking loads in both Utility and UPS operating modes
One additional 5-15/20R pass-through outlet supports UPS input power cord
Dual input power cables support PDU connection to separate Utility and UPS power sources
Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS
Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS
Set the switch to Utility to bypass the UPS and provide connected equipment with unfiltered power directly from the Utility line cord while the UPS system is removed and replaced with a fresh one
Once the new UPS is up and running with all connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment
Applications
Hot-swap PDUs are ideal to install along with standard UPS systems to ensure that connected networking equipment will see no power interruption as the UPS is serviced, replaced or upgraded
Package Includes
Hot-swap PDU System
2U mounting brackets
User manual with warranty information
PDUB20 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated 2200 to 2600VA with a 5-20P input plug. Pair of attached 5-20P PDU input cables connect to separate Utility and UPS power sources. 4 5-15R and 4 5-15/20R outlets support critical networking loads in both Utilty and UPS operating modes. 2U rackmount installation in 2 or 4 post racks with support for space saving rear-post mounting in the same rack space as your Tripp Lite Rackmount UPS (select installations, see manual)
Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads
PDUB20 is universally compatible with any Tripp Lite or other brand of 100-127V UPS rated up to 2600VA or 1920 watts with a NEMA 5-15P or 5-20P input cable
2U horizontal rackmount form factor compatible with 2 or 4 post racks
Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS systems (select installations, see manual)
Pair of attached 5-20P PDU input cables connect to separate Utility and UPS power sources
4 5-15R and 4 5-15/20R outlets support critical networking loads in both Utility and UPS operating modes
One additional 5-15/20R pass-through outlet supports UPS input power cord
Dual input power cables support PDU connection to separate Utility and UPS power sources
Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS
Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS
Set the switch to Utility to bypass the UPS and provide connected equipment with unfiltered power directly from the Utility line cord while the UPS system is removed and replaced with a fresh one
Once the new UPS is up and running with all connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment
Applications
Hot-swap PDUs are ideal to install along with standard UPS systems to ensure that connected networking equipment will see no power interruption as the UPS is serviced, replaced or upgraded
Package Includes
Hot-swap PDU System
2U mounting brackets
User manual with warranty information