IMC iMcV VDSL2-LANextender - media converter - 10Mb LAN, 100Mb LAN, Ethernet over VDSL
Mfg # 851-18200
CDW # 2135777
| UNSPSC 43201553
Quick tech specs
- Media converter
- Ethernet over VDSL
- 100Base-TX
- up to 1.2 miles
- 100Mb LAN
- 10Base-T
- RJ-45 / RJ-11
Know your gear
VDSL Ethernet LAN Extenders enable LAN and campus network managers and service providers to use an existing phone-grade wiring plant to extend 10 Mbps and 100 Mbps Ethernet twisted pair interfaces by using Ethernet over VDSL; the 100 meter distance limitation of twisted pair data cabling is no longer a challenge.
Designed with second generation VDSL (Very high-bit-rate Digital Subscriber Line) technology, the IE-iMcV-VDSL2- LANextender allows the transmission of data over sub-standard CAT3 and other telephone cabling to achieve higher data rates than comparable VDSL converters at short distances (less than 100 meters), while supporting asymmetrical data rates on substantially longer lines (greater than 2 km).
The IE-iMcV-VDSL2-LANextender has been designed to provide the greatest possible transport data rate over a single pair of unshielded copper wire (CAT3). It allows the user to select either symmetrical or asymmetrical data rates on a short line of less than 2,000 feet. Either selection downgrades to an asymmetrical data rate on longer lines and can operate beyond 5,000 feet depending on the condition of the line and the electrical noise environment. At all times, the four "Quality" LEDs provide an indication of the max downstream bandwidth provided by the VDSL line. This also indirectly indicates the line length and noise on the line in use.
Designed with second generation VDSL (Very high-bit-rate Digital Subscriber Line) technology, the IE-iMcV-VDSL2- LANextender allows the transmission of data over sub-standard CAT3 and other telephone cabling to achieve higher data rates than comparable VDSL converters at short distances (less than 100 meters), while supporting asymmetrical data rates on substantially longer lines (greater than 2 km).
The IE-iMcV-VDSL2-LANextender has been designed to provide the greatest possible transport data rate over a single pair of unshielded copper wire (CAT3). It allows the user to select either symmetrical or asymmetrical data rates on a short line of less than 2,000 feet. Either selection downgrades to an asymmetrical data rate on longer lines and can operate beyond 5,000 feet depending on the condition of the line and the electrical noise environment. At all times, the four "Quality" LEDs provide an indication of the max downstream bandwidth provided by the VDSL line. This also indirectly indicates the line length and noise on the line in use.