Tripp Lite 24000W APS 48VDC 120V Inverter / Charger w/ Auto Transfer Switching ATS Hardwired UL - DC to AC power
Mfg # APS2448UL
CDW # 493352
Quick tech specs
- Portable UL-rated power source for any type of equipment from power tools and computers as a vehicle inverter/standalone AC power source or a UPS
- Delivers clean 120V AC power from AC or DC power source
- Auto-transfer switching option for UPS operation
- Uninterruptible Power Supply/ PowerVerter/ power inverter/ CSA/ UL
- Ideal for RVs/construction equipment and emergency vehicles
- 2400W continuous output power; 4800W peak power
- Protects against blackouts/surges and EMI/RFI line noise
Know your gear
Tripp Lite's APS2448 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as a standalone 48V inverter or an extended run UPS. Supplies up to 2400 watts of continuous 120V AC power from a 48V DC bus or battery set. When optional-use hardwire input AC cable is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies DC source and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line to battery power transfer voltages
Key Buying Points:
Functions as a 48V standalone AC power source or an extended run UPS system
Includes hardwire AC input and auto-transfer to enable battery charging and automatic UPS support for blackouts and brownouts
2400 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
Runtime is dependent upon site supported 48V DC bus or by the size and number of user-supplied batteries 48 volt configuration
Hardwire input and output connections supported, DC input terminals for 48V battery connection
Converts 48 volt DC to 120 volt AC
Carries UL safety approval
Frequency control for operating stability
Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
Resettable circuit breaker protects APS against system overload
Switch allows user to select between off, auto-invert and charge-only settings
6 diagnostic LEDs indicate AC present, on battery, overload, and battery voltage level (high, medium, and low)
Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup
Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
RJ45 port allows connection of APS remote switch (part# APSRM)
Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
UL approved
Package Includes:
APS2448 Inverter/Charger
Instruction manual with warranty information
Key Buying Points:
Functions as a 48V standalone AC power source or an extended run UPS system
Includes hardwire AC input and auto-transfer to enable battery charging and automatic UPS support for blackouts and brownouts
2400 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
Runtime is dependent upon site supported 48V DC bus or by the size and number of user-supplied batteries 48 volt configuration
Hardwire input and output connections supported, DC input terminals for 48V battery connection
Converts 48 volt DC to 120 volt AC
Carries UL safety approval
Frequency control for operating stability
Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
Resettable circuit breaker protects APS against system overload
Switch allows user to select between off, auto-invert and charge-only settings
6 diagnostic LEDs indicate AC present, on battery, overload, and battery voltage level (high, medium, and low)
Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup
Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
RJ45 port allows connection of APS remote switch (part# APSRM)
Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
UL approved
Package Includes:
APS2448 Inverter/Charger
Instruction manual with warranty information