Fluke 80i-110s AC/DC Current Probe
Mfg # 80I-110S
CDW # 1336530
Know your gear
The ideal current probe for Fluke ScopeMeter® Test Tools
Accurate current measurements become more and more critical
when troubleshooting electric, electronic, and automotive circuits. The Fluke 80i-110s AC/DC Current Probe is designed to provide you with safe, high accuracy measurements for a wide range of applications.
The specially designed builtin safety features such as the
600 V rms rating at the input jaws, output cable, and BNC
connector enhance work safety in industrial and commercial
power distribution systems.
The probe is shielded for high noise immunity, to prevent
unwanted noise when troubleshooting around noise generating
devices like adjustable speed motor drives and ignition
systems.
The 80i-110s accurately reproduces current waveforms
as they occur. Connect the clamp to a Fluke ScopeMeter
Test Tool or other waveform recording device like a Fluke
Power Harmonics Analyzer, to clearly see distorted waveforms that result from non-linear loads
such as computers, adjustable speed motor drives, and electronic ballasts for fluorescent lighting.
Current clamps, not specifically designed for oscilloscopes, may add distortion to the actual signal present in the system under test. This makes it difficult
to get an accurate waveform measurement.
The wide measurement range from 50 milliamps to 100 Amps with a high fidelity millivolt output gives you full
advantage of the high resolution oscilloscope displays. This gives you the true picture of your current situation, and allows useful measurements as low as 10 milliamps.
The broad band frequency response of the Fluke 80i-110s
AC/DC Current Probe from dc to 100 kHz supports a wide range of applications where the probe can be used. The probe can be used to track down leakage currents discharging car batteries or to measure dc currents in an Uninterruptible Power Supply (UPS), that uses a
battery backup system.
With its narrow jaw design, the Fluke 80i-110s makes it
easy to take measurements in tight spots.
when troubleshooting electric, electronic, and automotive circuits. The Fluke 80i-110s AC/DC Current Probe is designed to provide you with safe, high accuracy measurements for a wide range of applications.
The specially designed builtin safety features such as the
600 V rms rating at the input jaws, output cable, and BNC
connector enhance work safety in industrial and commercial
power distribution systems.
The probe is shielded for high noise immunity, to prevent
unwanted noise when troubleshooting around noise generating
devices like adjustable speed motor drives and ignition
systems.
The 80i-110s accurately reproduces current waveforms
as they occur. Connect the clamp to a Fluke ScopeMeter
Test Tool or other waveform recording device like a Fluke
Power Harmonics Analyzer, to clearly see distorted waveforms that result from non-linear loads
such as computers, adjustable speed motor drives, and electronic ballasts for fluorescent lighting.
Current clamps, not specifically designed for oscilloscopes, may add distortion to the actual signal present in the system under test. This makes it difficult
to get an accurate waveform measurement.
The wide measurement range from 50 milliamps to 100 Amps with a high fidelity millivolt output gives you full
advantage of the high resolution oscilloscope displays. This gives you the true picture of your current situation, and allows useful measurements as low as 10 milliamps.
The broad band frequency response of the Fluke 80i-110s
AC/DC Current Probe from dc to 100 kHz supports a wide range of applications where the probe can be used. The probe can be used to track down leakage currents discharging car batteries or to measure dc currents in an Uninterruptible Power Supply (UPS), that uses a
battery backup system.
With its narrow jaw design, the Fluke 80i-110s makes it
easy to take measurements in tight spots.