Allied Telesis 10/100TX to 10FL/100SX 850nm fiber SC Media Converter
Mfg # AT-MC116XL-10
CDW # 387944
| UNSPSC 43222608
Know your gear
The AT-MC116XL auto-negotiates during the link up phase of the connection to set the speed (10/100) and operation mode (Full or Half Duplex).
Fiber Connections:
The Allied Telesis range of 850nm fiber Fast Ethernet media converters allows users to extend the size of UTP networks with the use of fiber cabling. Converting between 10BASE-T and 10BASE-FL or 100BASE-TX and 100BASE-SX fiber quickly and reliably, the AT-MC116XL addresses the growing demand for a low-cost solution for fiber installations of 300 meters or less. To maximize flexibility, the converters comes in SC fiber connector styles.
Auto-negotation:
The AT-MC116XL auto-negotiate during the link up phase of the connection to set the speed (10/100) and operation mode (Full or Half Duplex). When connecting media converters to autonegotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Halfduplex mode, allowing the link to be established with the greatest bandwidth.
MissingLink™
The MissingLink feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, failure in one fiber link will be signalled to the switch, allowing the second link to become active.
Simple Installation
All the media converters with a UTP connection feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiberoptic test equipment.
Standalone or Rackmountable
Each media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.
Technical Support
In addition to the lifetime limited warranty coverage, Allied Telesis offers free technical support via our online knowledge base. Warranty and technical assistance options can be supplemented by purchasing a Net.CoverSM service contract. One year contracts are available for three different levels of support.
Features:
10/100BASE-SX fiber port
10/100BASE-TX copper port
Auto-negotiation
Fits the AT-MCR12 rackmount chassis
Full and Half Duplex operation
Lifetime limited warranty
Link Test
MDI/MDIX
MissingLink™
Transparent to 802.1Q packets
The Allied Telesis range of 850nm fiber Fast Ethernet media converters allows users to extend the size of UTP networks with the use of fiber cabling. Converting between 10BASE-T and 10BASE-FL or 100BASE-TX and 100BASE-SX fiber quickly and reliably, the AT-MC116XL addresses the growing demand for a low-cost solution for fiber installations of 300 meters or less. To maximize flexibility, the converters comes in SC fiber connector styles.
Auto-negotation:
The AT-MC116XL auto-negotiate during the link up phase of the connection to set the speed (10/100) and operation mode (Full or Half Duplex). When connecting media converters to autonegotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Halfduplex mode, allowing the link to be established with the greatest bandwidth.
MissingLink™
The MissingLink feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, failure in one fiber link will be signalled to the switch, allowing the second link to become active.
Simple Installation
All the media converters with a UTP connection feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiberoptic test equipment.
Standalone or Rackmountable
Each media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.
Technical Support
In addition to the lifetime limited warranty coverage, Allied Telesis offers free technical support via our online knowledge base. Warranty and technical assistance options can be supplemented by purchasing a Net.CoverSM service contract. One year contracts are available for three different levels of support.
Features:
10/100BASE-SX fiber port
10/100BASE-TX copper port
Auto-negotiation
Fits the AT-MCR12 rackmount chassis
Full and Half Duplex operation
Lifetime limited warranty
Link Test
MDI/MDIX
MissingLink™
Transparent to 802.1Q packets