MiLAN MIL-SM8TAF1GPA - switch - 8 ports
Mfg # MIL-SM8TAF1GPA
CDW # 1559753
| UNSPSC 43222612
Quick tech specs
- SM8TAF1GPA
- 8 ports
- 10Base-T, 100Base-TX, 1000Base-T + 1 x shared SFP (empty)
- external
- Switch
- Ethernet, Fast Ethernet, Gigabit Ethernet
- PoE
Know your gear
The MIL-SM8TAF1GPA is an intelligent Layer 2 switch with eight 10/100/1000BASE-T ports, one of which is a Gigabit combination port that is shared with a Gigabit SFP slot.
The switch employs a wire-speed, non-blocking switching fabric which permits simultaneous wire-speed transport of multiple packets at low latency on all ports. The switch also features full-duplex capability on all ports that effectively doubles the bandwidth of each connection.
The switch uses store-and-forward switching to ensure maximum data integrity.
The switch's eight 10/100/1000 Mbps ports support the IEEE 802.3af Power-over-Ethernet (PoE) standard that enables DC power to be supplied to attached devices using the Ethernet cable. For each attached 802.3af compliant device, the switch automatically senses the load and dynamically supplies the required power. Independent overload and short-circuit protection for each port allows the switch to automatically shut down a port's power when limits are exceeded.
Port 1 on the switch can provide up to 25 W of power to an attached device at the standard 48 DC voltage. Ports 2-8 can provide up to 15.4 W of power.
The switch contains a comprehensive array of LEDs for "at-a-glance" monitoring of network and port status. It also includes a management agent that allows you to configure or monitor the switch using its embedded management software.
The switch employs a wire-speed, non-blocking switching fabric which permits simultaneous wire-speed transport of multiple packets at low latency on all ports. The switch also features full-duplex capability on all ports that effectively doubles the bandwidth of each connection.
The switch uses store-and-forward switching to ensure maximum data integrity.
The switch's eight 10/100/1000 Mbps ports support the IEEE 802.3af Power-over-Ethernet (PoE) standard that enables DC power to be supplied to attached devices using the Ethernet cable. For each attached 802.3af compliant device, the switch automatically senses the load and dynamically supplies the required power. Independent overload and short-circuit protection for each port allows the switch to automatically shut down a port's power when limits are exceeded.
Port 1 on the switch can provide up to 25 W of power to an attached device at the standard 48 DC voltage. Ports 2-8 can provide up to 15.4 W of power.
The switch contains a comprehensive array of LEDs for "at-a-glance" monitoring of network and port status. It also includes a management agent that allows you to configure or monitor the switch using its embedded management software.